We have collected and are comparing popular Phanteks P500A review.The reviews from this article are from, recognised companies like Tomshardware, GamersNexus, and TechPowerUp.
There is multiple cases, that are good for a vertical mount GPU, and we have a list of them here. Whatever case you choose, remember to measure the length of your graphics card. Furthermore, if you have an entry-level GPU, these cases are pointless to purchase.
Only pricey graphics cards should be installed in PC cases with vertical mount slots/brackets. It's also a good idea to seek for PC cases with plenty of room for airflow. When a GPU is installed vertically inside a chassis, it might prevent air from reaching other vital components. As a result, only computer cases with at least two fans at the front for optimal airflow should be considered.
Form-Factor | Mid-Tower |
Front Ports | 2 x USB 3.1 Gen1, 1 x Microphone, and x1 Headphone |
Motherboard Support | EATX/ATX/microATX/Mini-ITX |
Vertical Mount Slots | 2 |
Expansion Slots | 7 |
GPU Length | 420mm |
Drive Bays | 4 x 3.5” and 3 x 2.5” Bay |
PSU Recommended | ATX |
The ASUS TUF Gaming GT501 is a well-made PC case that can easily accommodate motherboards up to E-ATX. The black metal chassis and 4-mm smoked glass full view side panel allow you to show off your creation to its full potential.
At the top of the PC case, there are several I/O ports for connecting various accessories. At the same time, you may connect USBs, x1 headphone, and x1 microphone.
Let's go right to the point: does this case come with a vertical GPU attachment bracket built in? Yes, the ASUS TUF Gaming GT501 PC case has two vertical mount expansion slots. However, it is missing a PCI Riser cable, which must be purchased separately.
Furthermore, the case has three 120mm Aura sync RGB fans in the front and one 140mm PWM fan in the back for effective cooling. There are also seven fan mounting locations if you want additional cooling.
Overall, the TUF Gaming GT501 is a roomy mid-tower PC case with solid construction. It has RGB Aura sync fans to enhance the aesthetics of your gaming setup. This enclosure can easily accommodate GPUs with a length of up to 480mm. This means that most mid-range to high-end GPUs will suit perfectly in this instance.
Form-Factor | Mid-Tower |
Front Ports | 2 x USB 3.1 Gen1, 1 x Microphone, and x1 Headphone |
Motherboard Support | EATX/ATX/microATX/Mini-ITX |
Vertical Mount Slots | 2 |
Expansion Slots | 7 |
GPU Length | 420mm |
Drive Bays | 4 x 3.5” and 3 x 2.5” Bay |
PSU Recommended | ATX |
When it comes to selecting a PC case for your gaming setup, NZXT is one of the most dependable companies available. It's a little PC case that provides excellent value for the money. A flush tempered glass side panel allows you to view what's happening on within your PC case.
To be honest, this is one of the most organized and well-kept gaming PC cases we've seen. Apart from its compact footprint, this case has plenty of room inside for hefty peripherals, so if you're creating a water-cooled gaming PC, this may be the appropriate case for you.
This case comes with two slots for attaching your graphics card vertically. It comes with two built-in ARGB strips to enhance the look of your gaming PC. NZXT's software also allows you to personalize the RGB lights.
There are two fans, one in the front (280mm) and one in the back (180mm), for improved cooling (120mm). Plus, if you want high-end cooling, there's plenty of room for more fans. There is also improved cable routing with pre-installed straps for better cable management. There are also dust filters in this enclosure to keep dirt out.
Overall, the NZXT H510i is a well-built PC box with plenty of room for additional components. There are six drive bays in all, three for 3.5′′ drives and three for 2.5′′ disks. Furthermore, the top panel of this case provides excellent support for sophisticated I/O.
We have collected and are comparing popular Phanteks P500A review.The reviews from this article are from, recognised companies like Tomshardware, GamersNexus, and TechPowerUp.
We have collected and are comparing popular NZXT H700I review.The reviews from this article are from, recognised companies like Tomshardware, GamersNexus, and TechPowerUp.
Form-Factor | Mid-Tower |
Front Ports | x2 USB 3.0, x2 USB 2.0, Audio & Mic Jack |
Motherboard Support | E-ATX/ATX/microATX/Mini-ITX |
Vertical Mount Slots | 2 |
Expansion Slots | 7 |
GPU Length | 412mm |
Drive Bays | x2 2.5” and x3 3.5” bay |
PSU Recommended | ATX |
Hardcore gamers like the brand Cooler Master. The Cooler Master H500P has mesh ventilation in the front, as well as x2 200mm fans for optimal airflow. A light grey tempered glass window on the side allows you to view what's going on within.
For quicker data transfer, you may add up to x2 USB 3.0s and x2 USB 2.0s to the top. There's plenty of area inside for hefty hardware to be installed. However, the number of drive bays available to enhance your disk storage space is restricted.
There are two vertical slots to install your graphics card in addition to the seven normal expansion slots. Furthermore, there are several locations on this case where 200mm and 140mm fans may be installed for maximum cooling.
Because of the front-mounted 200mm RGB fans, this case has better ventilation. When installing your GPUs vertically, this case, like the others on our list, lacks a PCI-E riser cable. If you choose this PC case, you must purchase one.
Our objective is to find a PC case that makes your graphics card appear good on the inside, and the Cooler Master H500P is the appropriate match for that. There are two color options for this case: white and black.
After all is said and done, the Cooler Master H500P is a solid alternative for PC gamers that want more than one vertical mount bracket in their case.
Form-Factor | Mid Tower |
Front Ports | x2 USB 3.0, RGB Switch, and HD Audio jack |
Motherboard Support | ATX/microATX/Mini-ITX |
Vertical Mount Slots | 2 |
Expansion Slots | 7 |
GPU Length | 410mm |
Drive Bays | x2 2.5” and x3 3.5” drives |
PSU Recommended | ATX |
The Thermaltake Commander C35 is a tiny and cheap PC case with a meshed front that will give your gaming setup a gorgeous aesthetic. For maximum ventilation, there are two powerful 200mm RGB fans on the front. There's also a tempered glass side panel to observe what's going on behind the scenes on one side.
This PC case is compatible with ATX-format motherboards. On the top panel of this enclosure, there are two USB 3.0 ports, one RGB switch, and an HD audio jack.
Again, this PC case lacks a PCIe riser cable, so you'll have to purchase one separately. However, there isn't enough room in this case for more than four hard disks.
Only two expansion slots are available for vertically mounting your graphics card, out of a total of seven.
This is an excellent PC case for someone looking for a small PC box with enough of ventilation at a reasonable price.
Additionally, several customers have expressed their dissatisfaction with the noise generated by the front fans. If the noise bothers you, you may adjust the fan speed via the motherboard.
Overall, this is a low-cost PC box with adequate room for robust gaming components to be installed.
Form-Factor | Mid Tower |
Front Ports | x2 USB 3.0, RGB Switch, and HD Audio jack |
Motherboard Support | ATX/microATX/Mini-ITX |
Vertical Mount Slots | 2 |
Expansion Slots | 7 |
GPU Length | 410mm |
Drive Bays | x2 2.5” and x3 3.5” drives |
PSU Recommended | ATX |
The Thermaltake A700 is a simple and classic-looking PC case that's perfect for sprucing up your computer's peripherals. The Thermaltake logo is emblazoned on the front metal plate. The Dual 4mm thick Tempered Glass on the sides showcases the strong components packed inside the casing. The side glass panel is also molded to match the outside aluminum shell, blending in with the rest of the casing.
You have access to a few useful I/Os and nothing else on the top panel. However, there is sufficient of room within this box to tuck wires and numerous 2.5′′ and 3.5′′ drives. The Thermaltake A700 can accommodate graphics cards with a length of up to 410mm.
You don't need to install a PCI-E riser cable in this PC case because it doesn't require one. This is due to the fact that your motherboard may be mounted horizontally in this PC case. As a result, graphics cards may be installed vertically without the use of a PCI-E riser cable.
Two preinstalled 140mm fans with one at the front and one at the rear
It's an excellent case for building a high-end liquid-cooled gaming PC. The Thermaltake A700's design and construction quality are unrivaled.
There is no benefit to installing your GPU vertically in terms of performance. Mounting your GPUs in this manner just adds to the beauty of your gaming gear. If your GPU has RGB lights, for example, placing it vertically within a transparent PC box makes it seem cooler.
With the aid of a 200mm riser cable, you may mount a GPU vertically inside a NZXT H510 PC chassis. Also, ensure that the cable you select has a right-angle connection. Amazon is a good place to look for a good riser cable. Finally, if you want to vertically install your graphics card within the NZXT H510 chassis, its width should not exceed 2.5 slots.
Yes, but only with extreme caution. A GPU that is vertically too near to a side panel can block airflow and cause the case to overheat. To fit the vertical GPU, you'll need lots of space or liquid cooling.
It sucks in the cooler fresh air that is brought in from any intake fans that are often found around the bottom of the case when it is turned down. This keeps the graphics card cool while also allowing air to circulate freely around the rest of the system.
Every fan works in the same way. They draw air in from one side of the fan and push it out the other.